Wednesday, June 29, 2011

You are Perfect PTU



This tutorial was written by me, Lori, on June 28, 2011.
And it was written for those who should already have a basic knowledge of working with PSP. I used Paint Shop Pro X3
Do not copy this tutorial and post it through any group or claim it as your own. Please share a text link only.
Any resemblance to any other tutorial is strictly coincidental.
Supplies needed
Tube(s) of choice, I used the Artwork by © Suzanne Woolcott you must purchase a license found here.
PTU Scrapkit by Tootypup called Lily of the Valley and can be found here.
Tag template by Divine Intentionz and can be found here.



Please remember to stop and save often.
Add drop shadow of choice as you go. Refer to my example as needed, merge layers down as needed to make things a little easier.

Let's Rock this Tutorial!!

Open up the template.
Shift + D.
Close out the original.
Delete small rectangle layer.
Resize canvas to 800x800 (will resize, crop later)

Highlight rectangle back layer.
Select-all-float-defloat
Add New Raster layer.
Flood fill with color #6a3451.
Selections-modify-contract by 7.
Hit delete button on keyboard.
Deselect.
Arrange above rectangle layer.
Adjust-noise-uniform, noise @ 70%
Delete the template layer.

Highlight rectangle layer.
Click on it with your Magic Wand.
New Raster layer.
Copy and paste Paper 3 Into Selection.
Deselect.
Delete the template layer.

Open dew drops element.
Resize 40%
Move over the thin rectangle left layer.
Duplicate
Move over the thin rectangle right layer.
Delete the template layers.
Go to your original dew drops
Undo last command, keep open.

Highlight center rectangle layer.
Select-all
Add New raster layers
Paste paper 6 into selection.
Delete template layer.

Go back to original dew drops element.
Resize 60%
Move over the thin rectangle center layer.
Delete the template layer.
You may now close the original dew drops.

Highlight circle back layer.
Delete Layer.
Highlight circle layer.
Open element Cameo Frame.
Resize 75%
Copy and paste as a new layer.
Arrange a little to the right of the circle layer.
Delete template layer.

Highlight Cameo Frame.
With magic wand, click inside the frame.
Seletions-expand by 15.
Add new raster layer below the frame.
Copy and paste paper 7 into selection.
Deselect.

Paste tube of choice below the cameo frame.
Arrange to liking so it's inside the frame
Go to adjust-color-red/green/blue with settings at
Red: 4, Green: 20 and Blue: 10
Set the blend mode to multiply
Visibility to 80.

Highlight Frame layer.
With magic wand, click inside top frame.
Add new raster layer below the frame layer.
Paste paper 5 into selection.
Do this with each frame alternating different papers and pasting on the same raster layer as the first paper.
Delete original frame back and raster 18.

Highlight frame layer once again.
With magic wand, click on the white of the frame.
Select-float-defloat
Add new raster layer.
Paste paper 1 into selection.
Delete template layer.

Open element birdfeeder2, Clock2, and lily of the valley5.
Resize to fit inside top 3 frames.

Highlight rectangle back, the smaller rectangle back at the bottom.
Select-all-float-defloat
Add New Raster layer.
Flood fill with color #cbcf81.
Selections-modify-contract by 7.
Hit delete button on keyboard.
Deselect.
Arrange above rectangle layer.
Adjust-noise-uniform, noise @ 70%
Delete the template layer.

Highlight rectangle layer.
Click on it with your Magic Wand.
New Raster layer.
Copy and paste Paper 6 Into Selection.
Deselect.
Delete the template layer.

Add any other element of choice.

Add tube arrange to liking.

With Satisfaction font
Color 6a3451
Size 72
type in the word 'Perfect'
Convert to raster layer.
Select-all-float-defloat
Add new raster layer below the original layer.
Modify-expand by 2.
Flood fill with color cbcf81.


With Kristen ITC font
Color cbcf81
Size 72
type in the words 'you are'
arrange above the word perfect.
Type in the words 'to me'
arrange below the word perfect.
Convert to raster layer.
Select-all-float-defloat
Add new raster layer below the original layer.
Modify-expand by 2.
Flood fill with color cbcf81.


Add your name, Copyright info, license and save!

Thanks for Rocking Out my tutorial, I hope you enjoyed! ~Lori
Friday, June 24, 2011

'Love my dog' PTU tutorial and Love my dog/cat QP freebies


QP preview and links are below the tutorial.
This tutorial was written by me, Lori, on June 21, 2011.
And it was written for those who should already have a basic knowledge of working with PSP. I used Paint Shop Pro X3
Do not copy this tutorial and post it through any group or claim it as your own. Please share a text link only.
Any resemblance to any other tutorial is strictly coincidental.
Supplies needed
Tube(s) of choice, I used the Artwork by ©Tyson McAdoo you must purchase a license found here.
Tag template by Missy of Divine Intentionz and can be found here.
PTU Scrapkit by Stina called Wags 'N Whiskers and can be found here.
Weescotslass mask #83 which can be found here. Look under goodies.
WSL mask #75 which can be foundHere.


Please remember to stop and save often.
Add drop shadow of choice as you go. Refer to my example as needed, merge layers down as needed to make things a little easier.

Let's Rock this Tutorial!!

Open the template in PSP, using your shortcut keys on your keyboard (SHIFT+D) duplicate the template as a new image. Close the original.

Open papers of choice and the mask. Minimize for later use.

Go to raster1, select-All-float-defloat, add new raster layer and paste paper of choice into selection, go to layers-new mask layer, from image and add mask WSL mask #83, go to layers-merge-merge group.

Go to the rounded rectangle layer, Selections-all-add new raster layer and paste paper of choice into selection, delete original layer. Do this with Raster 2, rounded rectangle2, rectangl, frame back and rounded rectangle, alternating papers of choice. Delete all original layers and the stars layer.

Open frame3, resize to fit, copy and paste as a new layer, over the rounded rectangle2 layer.

Open pocket of choice, resize to fit, copy and paste as a new layer, arrange in middle of the rounded rectangle3 layer.

Open flower of choice, resize, copy and paste as a new layer, over the bottom of the pocket.

Open bone tag of choice, resize, copy and paste as a new layer, top right corner of the rounded rectangle2 layer.

Open pawprint of choice, resize, copy and paste as a new layer, bottom right corner of the rounded rectangle2 layer. Duplicate layer 2 times and arrange above each pawprint. Merge them down till all 3 are on one layer, duplicate and arrange a little to the left and just a little up, so it looks like they are 'walking'.

Open dog of choice, resize, copy and paste as a new layer, arrange inside the frame back, go to the frame back layer, select-All-float-defloat-invert, go to the dog layer and hit the delete key on the keybord to erase any dog or cat, outside of frame.

Open frame of choice, I used one of the 'Polaroid' frames, resize, copy and paste as a new layer, arrange over the dog layer.

Open bow of choice, resize, copy and paste as a new layer, top of the raster2 layer.

Open flower of choice, resize, copy and paste as a new layer, over the middle of the bow.

Open tube of choice, resize and arrrange to liking.

Add your name, Copyright info, license and save!

Thanks for Rocking Out my tutorial, I hope you enjoyed! ~Lori

Here are previews of the 2 QP freebies:








you can download them here:

Wednesday, June 8, 2011

Desktop Freebie!

I made a freebie from the kit 'Everybody loves Chris' kit by Wicked Princess Scraps.

Here's a preview w/my handsome Grandson...
(download link is below preview) 


Download here
Sunday, June 5, 2011

Good Friends tutorial using PTU kit Summer Cottage


 (below this tutorial is also a scrap page I made with this awesome scrap kit!!)

This tutorial was written by me, Lori, on June 2, 2011.
And it was written for those who should already have a basic knowledge of working with PSP. I used Paint Shop Pro X3
Do not copy this tutorial and post it through any group or claim it as your own. Please share a text link only.
Any resemblance to any other tutorial is strictly coincidental.
Supplies needed
Tube(s) of choice, I used the Artwork by ©Pinup Toons you must purchase a license found here. (I'm using a tube from CILM, which as we all know is now closed.)
Tag template by Missy of Divine Intentionz and can be found here.
PTU Scrapkit by Shani of Wicked Princess called Summer Cottage and can be found here.
Vix mask #291 which can be found here. Look under goodies.
WSL mask #75 which can be found Here.
PTU Good friends Wordart of Wordart World by Jennifer and you can purchase it here.
Plug In: Xero
Plug In: Xenofex 1.0
Plug In: eye candy 4000
Please remember to stop and save often.
Add drop shadow of choice as you go. Refer to my example as needed, merge layers down as needed to make things a little easier.

Let's Rock this Tutorial!!

Open the template in PSP, using your shortcut keys on your keyboard (SHIFT+D) duplicate the template as a new image. Close the original.

Resize Canvas to 750x750 pixels, you may resize later.

Open papers 4, 5, 12, 16 and QP-SC-PP (it has no number) and both the masks. Minimize for later use.

Go to raster1, select-All-float-defloat, add new raster layer and paste paper 5 into selection, go to layers-new mask layer, from image and add mask WSL mask #75, go to layers-merge-merge group. Do this again but using mask Vix #291 using the same paper.

Go to the circle layer, Selections-all-add new raster layer and paste paper 4 into selection, without deselecting, go back to circle layer, selections-float-defloat-invert, go to the paper4 layer and hit the delete key on your keyboard.

Open element circle frame2, copy and paste as a new layer, over the paper4 circle layer.

Go to rectangles 1 and 2, open element heartframe, re-size 217x213 pixels, copy and paste one over the rectangle on the right, duplicate layer, go to image-mirror and arrange over the rectangle on the left, delete both rectangles. For each heart, go to effects-plugins-eyecandy 4000-glass using these settings:

Go to frame2 layer, open element TRISCALLOPEDFRAME, re-size 324x138 pixels, copy and paste over left side of frame2, making sure only two of the frames are showing.
Duplicate layer, and with your pick tool, slide over the the right side of frame2, making sure only two of the frames are showing. Making sure the top frame is active, merge down to the original frame element, rename this layer purple frame and delete original frame from template.

Open paper 16, go to purple frame layer and add new raster layer below it. Select-All, paste paper16 into the selection. Deselect. Go to the purple frame and with your magic wand, set to add (shift) and color, select inside each frame, go to Selections-modify-expand by 7, Selections-invert, go back to the paper layer and hit the delete key on the keyboard.

Open element butterflyframe, re-size 199x219 pixels, copy and paste above the purple frame layer, arrange over square3, the pink square on the bottom left, duplicate layer, go to image-mirror and arrange over square1 at the top right. Making sure the top frame is active, merge down to the original frame element. Delete layers, squares 1-4. Do the same to these frames as you did just above to the vertical frame using paper12 and arranging below the vertical frame.

Then merge the butterfly frames down to the purple frame element.

Add a tube of choice under the frame layer, re-size to liking, and arrange in any of the frames. Go to the frame layer, with your magic wand, select inside the frame w/the tube, go to selections-modify-expand by 7-invert, activate the tube layer and hit the delete key on your keyboard. Do this with each frame until you have the purple frames and 2 butterfly frames with a tube. Go to the first tube layer and merge down until all tubes are on one layer.

Go to effects-xero-porcelain with the below settings :




Open triframe element, go to image-rotate right, resize 124x285 pixels, copy and paste above the frame1 layer, duplicate and arrange so there are 5 frames, go to layers-merge-down. With your magic wand, select inside each frame, Selections-modify-expand by7, add a new raster layer below the frame layer and past paper WP_SC_PP into selections.

Open element flowerscatter, go to image-rotate right, re-size 93x292 pixels, copy and paste above the tall frame. Duplicate and move a little up go to image-mirror.

Open element rose vine, re-size 115x271pixels. Go to Image-free rotate-have left checked, free rotate 20.00. Copy and paste as a new layer and arrange to the bottom left of the tall frame. Go to image-mirror, arrange to the top right of the tall frame.

Add anyother elements of choice and arrange to liking.

Add another tube on top of the tall frame.


Open wordart GoodFriends, re-size 505x182 pixels. Copy and paste as a new layer and arrange to the bottom. Go to selections-all-float-defloat. Add a new raster layer flood fill the words 'are like stars....” with white. Add a new raster layer and flood fill 'good friends' with a color from your tube. Add a new raster layer arrange below the wordart layers, Selections-modify-expand by2, flood fill 'Good Friends” with white and 'are like stars....” with the same color from your tube. Merge all wordart layers down so that wordart is on one layer.

Add your name, Copyright info, license and save!

If you are not doing animation, stop here!!

ANIMATION:

Remember the layer with all the tubes in the frames? Go to that layer, duplicate. (I'm doing this with xenofex 1.0, if you are using the newer version this may be different, just make sure the visiblity is set to 70 in the end process.) Go to the original layer, (should be the bottom one) and set visiblity to 70. Go to the top layer, effects-xenofex- constellation with the following settings:
star size: 15
sharpness: 74
overdrive: 48
random speed: 50

Go to edit, copy merged and paste as new animation in animation shop. Back in paint shop pro, undo last command (the constellationsettings). Now
continue doing this changing the speed by 10 each time, till you hit 100, this should give you six layers.

Save in animation your 'normal' way.....
Thanks for Rocking Out my tutorial, I hope you enjoyed! ~Lori

My Daughter and her Husband on their Honeymoon!


Photobucket Thanks to Shani of Wicked Princess Scraps for the use of her kit, Strength In Me, a FTU kit to help raise awareness in testicular cancer. No matter what kind of cancer it is, if you love someone with cancer, be by their side and 'Love them through it'.
Photobucket
My Photo
Lori
Hello, my name is Lori. I work full time as a Grooming Salon Manager, I LOVE my 4 legged 'Babies'! (Hence the name of my blog) I'm soon to be married to a Great man, Put (actually it's his nickname). I have 2 Beautiful Daughters and 1 Handsome Son. I also have 2 Grandsons, Hunter and Trey, and a Step-Grandson, Logan! In my spare time I love to make tags and scrap page Lo's! I hope you enjoy and come back often!
View my complete profile
Photobucket
Photobucket

Photobucket

Photobucket

Photobucket

Photobucket

Photobucket

Photobucket

Photobucket
Photobucket

xanga

Photobucket

Photobucket